Peavey PR 15 Loudspeaker

A neodymium magnet and injection-molded polypropylene cab make the Peavey PR 15 Speaker light and strong. 400W handling; 15" woofer with 2" voice coil and neodymium magnet, 14XT compression driver, 1.4" titanium diaphragm, 90° x 40° horn, tweeter protection, fail-proof crossover, polemount, and heavy-duty metal grille. 21-1/2"W x 28-3/4"H x 17"D. 42 lbs.

Made in the USA.

Peavey PR 15 Loudspeaker Features:
· 400W handling
· 15" premium woofer
· 2" voice coil
· Lightweight neodymium magnet
· 14XT compression driver
· 1.4" titanium diaphragm
· 90° x 40° constant directivity horn
· Tweeter protection
· Fail-proof crossover
· Lightweight molded polypropylene enclosure
· Molded-in pole mount system
· Heavy-duty metal grille
· 21-1/2"W x 28-3/4"H x 17"D
· 42 lbs.

Available in 10” and 12” Speaker.

Peavey PVi 10 is a two-way speaker system

The PVi 10 is a two-way speaker system featuring a 10" woofer and a high frequency drive on an exponential horn. The lightweight-yet-rugged, carpet covered trapezoidal enclosure with top handle is ideal for live music, speech and music playback applications. A full length, black powder-coated steel grille provides driver protection and a professional appearance. The PVi 10 speaker system is rated at 50 watts program power handling. Its smooth response makes this system ideal for smaller venues where space is at a premium, and its two 1/4" input connectors keep amplifier hookup simple.

Carpet covered
Metal grille
10" premium speaker
Horn-loaded high frequency driver
Two-way enclosure
50 watts continuous, 100 watts program
Side-position monitor
Control-mount adaptor
Weight Unpacked: 37.04 lb(16.8 kg)
Weight Packed: 40.12 lb(18.2 kg)
Width Packed: 20"(50.8 cm)
Depth Packed: 28.25"(71.755 cm)
Height Packed: 10.25"(26.035 cm)

Peavey PV 215 Dual 15" 2-Way Speaker Cabinet

The Peavey PV 215 Dual 15" 2-Way Speaker Cabinet is loaded with double 15" speakers in a trapezoidal enclosure and is capable of handling 700W program and 1,400W peak power. Loaded with 2 - 15" premium woofers with a 2-3/8" voice coil for pumping plenty of low end. Built-in tweeter protection and a heavy-duty crossover supply the RX14 compression driver with clean power for the 90ø x 40ø degree constant directivity horn, while the carpet-covered cabinet and sturdy metal grille make the PV 215 a road-rugged loudspeaker.

Peavey PV 215 Dual 15" 2-Way Speaker Cabinet Features:
· 2-way trapezoidal sound reinforcement enclosure
· 700W program, 1,400W peak
· 2 - 15" premium woofers with a 2-3/8" voice coil
· RX14 compression driver with a 1-2/5" titanium diaphragm 1" exit
· 90ø x 40ø constant directivity horn
· Tweeter protection
· Heavy-duty crossover
· Heavy-duty metal grille

Peavey PV® 112 is a two-way speaker system

The PV® 112 is a two-way speaker system based on a 12" heavy/duty woofer and a RX™ 14 titanium diaphragm dynamic compression driver mounted on a 60 by 40 degree coverage constant-directivity horn. The lightweight-yet-rugged, carpet-covered trapezoidal enclosure with stand-mount cup facilitates portable use for live music or speech sound reinforcement, as well as music playback. A full-length black power-coated steel grille provides driver protection. The PV® 112 speaker system is rated at 400 watts program power handling, and the full crossover network includes high voltage film caps and dynamic tweeter protection for clear, punchy sound, and excellent long-term reliability. Two 1/4" phone jack input connectors make hook-up a breeze.

Two-way sound reinforcement enclosure
12" heavy/duty woofer
RX™ 14 titanium diaphragm compression driver
Dynamic tweeter protection
400 watts program/800 watts peak power handling
Heavy duty crossover network for driver protection and EQ
Lightweight trapezoidal enclosure
60 by 40 degree coverage constant-directivity horn
High quality, heavy/duty carpet covering
Steel handles
Steel corners
Rugged dado and rabbet construction
T-nut speaker mounting
Heavy/duty full-length steel grille
Steel mount cup
Weight Unpacked: 45.00 lb(20.412 kg)
Weight Packed: 50.00 lb(22.68 kg)
Width Packed: 14.62"(37.1348 cm)
Depth Packed: 29.06"(73.8124 cm)
Height Packed: 15.87"(40.3098 cm)

Peavey XR 8600/PR 15 PA Package

The Peavey PA system comes with the equipment you need to get up and running. You get Peavey XR 8600/PR 15 PA Package includes a Peavey XR 8600 powered mixer, Peavey PR 15 NEO passive speaker pair, 2 Peavey PVi2 dynamic microphones, 2 On-Stage Stands tripod speaker stands, 2 On-Stage Stands tripod mic stands with booms, and 2 Horizon 16-gauge 20' speaker cables.
 

Audio Performer Pack

Includes PVi® 4B mixer
Two PVi® 10 10" speaker enclosures
Two PVi® 100 dynamic cardioid microphones
Two speaker stands
Weight Packed: 80.00 lb(36.288 kg)
Width Packed: 19.87"(50.4698 cm)
Depth Packed: 28.5"(72.39 cm)
Height Packed: 20"(50.8 cm)

Peavey PV 15PM is a two-way powered monitor system

The Peavey PV 15PM is a two-way powered monitor system engineered with a bi-amplified class D power section that drives a 15" woofer with a 2 3/8" voice coil and a 1.4" titanium diaphragm 14T™ compression driver with 200 watts total power. The high-speed amp topology yields the highest audio resolution and efficiency available, and combined with the woofer's neodymium speaker magnet, yields extra-light weight.

Bi-amplified Class D powered system with 200 W total power
Both power amps have DDT™ speaker protection
15" heavy duty woofer with 2-3/8" voice coil and neodymium magnet
Woofer Servo for reduced woofer distortion
Automatic equal loudness (Fletcher-Munson) compensation
14T 1.4" titanium compression driver
Peak SPL up to 120 dB with music
Combo jack with 1/4" TRS and female XLR mic- or line-level balanced input
Two 1/4" phone jacks for link-out / direct-in capability
Weight Unpacked: 49.82 lb(22.6 kg)
Weight Packed: 55.56 lb(25.2 kg)
Width Packed: 19.375"(49.2125 cm)
Depth Packed: 27.75"(70.485 cm)
Height Packed: 17.25"(43.815 cm)

Available in 10

Peavey PV 118 Single 18" Subwoofer

The Peavey PV 118 Single 18" Subwoofer is a compact, vented subwoofer system using an 18" heavy-duty woofer with a 3" voice coil and a 65-oz. magnet. The black, perforated steel grille and steel corners provide protection and a professional appearance, and the sturdy steel handles allow ease of transport. A top polemount for 1-3/8" stand poles is incorporated and can be connected in parallel for daisy-chaining or to send a full-range signal to a P.A. cabinet. The impressive 400W program power rating allows plenty of gut-pounding bass. The internal low-pass crossover network, along with the vented enclosure, provides great bass response that will add the thump you desire.

Peavey PV 118 Single 18" Subwoofer Features:
· Vented bass subwoofer enclosure
· Pro Eighteen 18" premium woofer
· Optimized internal low-pass crossover network
· Polemount
· 400W program power handling
· 40Hz-180Hz (±3 dB)
· 95dB at 1W/1m
· 8 ohms
· Dado-jointed 3/4" MDF construction
· Heavy-duty powder-coated metal grille
· 22"W x 27"H x 19-1/2"D
· 73-1/2 lbs.

PV15M is a two-way system

Hear the whole band with astonishing clarity and punch! The PV15M is a two-way system with a 15-inch Sheffield® Pro 1500+™ premium woofer and a 14XT™ 1.4-inch titanium-diaphragm compression driver (no piezos) coupled to a constant-directivity horn with Sound Guard™ IV high-frequency driver protection. It is rated at 500 watts program and 1,000 watts peak power handling capability. This rugged trapezoidal enclosure can be angled at either 30 or 45 degrees from the floor in addition to being pole mounted. Two 1/4-inch, full-range parallel inputs allow easy daisy chaining.

Two-way floor monitor
500 W program power handling
68 Hz to 17 kHz
15" Sheffield Pro 1500+ woofer w/ 2.5" voice coil
14XT compression driver w/ titanium diaphragm, 1" exit
90 x 40 CD horn
Sound Guard IV tweeter protection
carpet covering
steel handle
Heavy duty metal grille
die-cast aluminum pole mount
Weight Unpacked: 39.00 lb(17.69 kg)
Weight Packed: 45.00 lb(20.412 kg)
Width Packed: 14.25"(36.195 cm)
Depth Packed: 26.37"(66.9798 cm)
Height Packed: 19.37"(49.1998 cm)

Peavey QW 2Z Series

Peavey designed the QW® Series for pristine audio reproduction in the high-end productions and large venues. QW enclosures include advanced audio technology and components such as our exclusive Quadratic Throat Waveguide™ horn, 44XT™ titanium diaphragm compression driver and Pro Rider® and Low Rider® woofers, plus very low power compression, low distortion at high output levels, Hammer Head™ exteriors and 16-gauge powder-coated, perforated steel grilles. All full-range top boxes include versatile flying points.

One Pro Rider® 15 inch woofer with Kevlar® impregnated cone, 4 inch voice coil, cast frame field-replaceable basket
44XT™ 4 inch titanium diaphragm compression driver with ferrofluid coupled to a CH®942qt constant directivity horn which employs Peavey patented Quadratic Throat Waveguide™ technology
Flexible flying provisions
Dispersion: 90 x 40
Sound Guard™ 44 high frequency driver protection circuit
Frequency response: 52 Hz - 18 kHz
Sensitivity: 97 dB
Power handling: 1600 watts program, 3200 watts peak
Max SPL: 132 dB
Two full-range, two bi-amp Neutrik® Speakon® connectors
SA™-1 pole-mount stand adapter
Durable Hammer Head™ black polyurea finish
Weight Unpacked: 96.40 lb(43.727 kg)
Weight Packed: 107.00 lb(48.535 kg)
Width Packed: 23.75"(60.325 cm)
Depth Packed: 35.25"(89.535 cm)
Height Packed: 24.75"(62.865 cm)

Peavey QW 2F

Peavey designed the QW® Series for pristine audio reproduction in the high-end productions and large venues. QW enclosures include advanced audio technology and components such as our exclusive Quadratic Throat Waveguide™ horn, 44XT™ titanium diaphragm compression driver and Pro Rider® and Low Rider® woofers, plus very low power compression, low distortion at high output levels, GatorHyde® exteriors and 16-gauge powder-coated, perforated steel grilles. All full-range top boxes include versatile flying points.

Features:
One Pro Rider® 15 inch woofer with Kevlar® impregnated cone, 4 inch voice coil, cast frame field-replaceable basket
44XT™ 4 inch titanium diaphragm compression driver with ferrofluid coupled to a CH®942qt constant directivity horn which employs Peavey patented Quadratic Throat Waveguide™ technology
Flexible flying provisions
Dispersion: 90 x 40
Sound Guard™ 44 high frequency driver protection circuit
Frequency response: 52 Hz - 18 kHz
Sensitivity: 97 dB
Power handling: 1600 watts program, 3200 watts peak
Max SPL: 132 dB
Two full-range, two bi-amp Neutrik® Speakon® connectors
SA™-1 pole-mount stand adapter
Durable GatorHyde® finish
Weight Unpacked: 96.40 lb(43.727 kg)
Weight Packed: 107.00 lb(48.535 kg)
Width Packed: 23.75"(60.325 cm)
Depth Packed: 35.25"(89.535 cm)
Height Packed: 24.75"(62.865 cm)

Peavey QW1 Series

The QW® 1 is engineered for the best performance on the market today. It is designed for the top end of a 3-way or 4-way professional high performance sound system. When coupled with a QW® 215 and QW® 218 low frequency enclosures, this 4-way system can reach sound pressure levels of 140 dB continuous. The QW® 1 is ideal for stadiums, arenas, concerts, theaters, cruise ships, etc. Patented technology leads the way in this system. It incorporates two high power mid-range drivers with 4 inch voice coils, a patented titanium compression driver with ferrofluid cooling coupled to a constant directivity horn with patented Quadratic Throat Waveguide™ technology. The enclosure has a durable Hammer Head™ finish and multiple flying points. Connections are made through a Neutrik® Speakon® connectors. Extra compact trapezoidal design for arraying.

Features 
Two 10 inch BWX 1008-8 HE woofers with 4 inch voice coils
Frequency response: 200 Hz to 18 kHz
Patented 44XT™ titanium compression driver, ferrofluid cooled, coupled to a CH®642qt constant directivity horn which employs our patented Quadratic Throat Waveguide™ technology
Flexible flying provisions
Maximum concert power
Designed for professional biamp applications
Power handling: Mid Section - 600 watts continuous,1200 watts program, 2400 watts peak
Power handling: High Section - 100 watts continuous, 200 watts program, 400 watts peak
Durable Hammer Head™ black polyurea finish
Weight Unpacked: 153.30 lb(69.536 kg)
Weight Packed: 176.00 lb(79.833 kg)
Width Packed: 23.87"(60.6298 cm)
Depth Packed: 51"(129.54 cm)
Height Packed: 33"(83.82 cm) 
 

Peavey QW4F Series

Peavey designed the QW® Series for pristine audio reproduction in the high-end productions and large venues. QW enclosures include advanced audio technology and components such as our exclusive Quadratic Throat Waveguide™ horn, 44XT™ titanium diaphragm compression driver and Pro Rider® and Low Rider® woofers, plus very low power compression, low distortion at high output levels, Hammer Head™ exteriors and 16-gauge powder-coated, perforated steel grilles. All full-range top boxes include versatile flying points.

Features 
Two Pro Rider® 15 inch speakers with Kevlar® impregnated cone, 4 inch voice coil, cast frame field-replaceable baskets
44XT 4 inch titanium diaphragm compression driver with ferrofluid coupled to a CH® 942qt constant directivity horn which employs Peavey patented Quadratic Throat Waveguide™ technology
Flexible flying provisions
Dispersion: 90 x 40
Sound Guard™ 44 high frequency driver protection circuit
Frequency response: 50 Hz - 18 kHz
Sensitivity: 100 dB
Power handling: 2800 watts program, 5600 watts peak
Max SPL: 137 dB
Two full-range, two bi-amp Neutrik® Speakon® connectors
Durable Hammer Head™ black polyurea finish
PLEASE NOTE: This item only available for in-store pickup
Weight Unpacked: 137.00 lb(62.143 kg)
Weight Packed: 170.00 lb(77.112 kg)
Width Packed: 23.75"(60.325 cm)
Depth Packed: 50.75"(128.905 cm)
Height Packed: 25.75"(65.405 cm) 
 

Samson Resound RS12 HD PA Speaker

The Samson Resound PA Speakers are excellent choices for club installs, rehearsal spaces, or mobile DJs who want to build a great-sounding portable PA system. Each Resound Speaker features two-way passive design, a heavy-duty steel grill that's built last, dual 1/4" and Speakon connections, and 1-inch compression drivers with a 1.5" titanium diaphragm. Offering a host of wedge monitors and traditional cabinet enclosures designed to suit a variety of monitoring situations, you can rely on Samson to meet your PA needs with the Resound PA Speakers!

Samson Resound RS12 HD PA Speaker at a Glance:
· Two-way passive PA speaker cabinet
· 250 watts RMS, 500 peak @ 8 ohms
· Custom designed 12-inch low frequency driver
· 1-inch compression driver with 1.5" Titanium diaphragm
· Rigid, carpet covered trapezoidal enclosure
· Heavy-duty steel grill
· Dual 1/4" and Speakon connections

Live! 1212 - Active PA Cabinet with 2 x 12" Drivers

The Live! 1212 delivers 400 watts to the custom designed, heavy-duty low frequency drivers, which feature oversize motors and large voice coils. An additional 100 watts is delivered to the high frequency compression driver, providing a remarkably articulate frequency response. For seamless operation we also used our own exclusive Optimax circuitry to divide audio into two separate bands and apply an independent compressor/limiter to each. As a result, you get maximum volume level without distortion or clipping. With versatility and reliability guiding the design for this loudspeaker, the Live! 1212 is a great choice for a high performance PA enclosure.

Two-way bi-amped active loudspeaker system
500 watts RMS total power (LF 400 watts + HF 100 watts)
Two custom designed, heavy-duty, 12-inch low frequency drivers with 3-inch voice coil
44 mm titanium compression driver with 1-inch exit
Dual limiter speaker processing
All plywood construction
XLR input with level control
XLR extension jack with Mix/Thru switch 

Is also Available in 15”

Live! 615 - Active 2-way PA Cabinet with 15" Driver

The Live! 615 delivers 250 watts to its custom designed, 15-inch low frequency driver, which features oversize motors and large voice coils. Another 50 watts is delivered to the high frequency compression driver with its titanium diaphragm for an exceptionally articulate response. The Live! series enclosures also employ exclusive Optimax circuitry which divides audio into two separate bands and applies an independent compressor/limiter to each, resulting in maximum volume level without distortion or clipping. Perfect for live music applications, house of worship, theatrical or club installations, the Live! Series from Samson offers a wide range of configurations and are a great choice for high performance loudspeakers.

 Two-way bi-amped active loudspeaker system
 300 watts RMS total power (LF 250 watts + HF 50 watts)
 Custom designed, heavy-duty, 15-inch low frequency driver with 3-inch voice coil
 34 mm titanium compression driver with 1-inch exit
 Dual limiter speaker processing
 All plywood construction
 Balanced microphone and line level inputs with two-band EQ
 XLR extension jack with Mix/Thru switch 

The 615 Active 2-way PA Cabinet is also available in 12" Driver

Live! 612M - Active 2-way Monitor with 12" Driver

As a two-way active, bi-amped monitor enclosure, the Live! 612M delivers 250 watts to the custom designed 12-inch low frequency driver and 50 watts to the high frequency titanium compression driver. These components work perfectly together to provide totally articulate and accurate sound reproduction. For increased reliability, the Live! power amplifiers feature large heat sinks and massive power transformers that will sustain high volume levels while successfully protecting the speakers. A great choice for high performance loudspeakers, the Live! Series from Samson offers a wide range of configurations and are perfect for live music applications, house of worship, theatrical or club installations.

Two-way bi-amped active stage monitor
300 watts RMS total power (LF 250 watts + HF 50 watts)
Custom designed, heavy-duty, 12-inch low frequency driver with 3-inch voice coil
34 mm titanium compression driver with 1-inch exit
Dual limiter speaker processing
All plywood construction
XLR input with two-band EQ and level control
XLR extension jack with Mix/Thru switch 

RS215 HD

With ample power and pristine audio quality, the RS215 HD is the big boy of the Resound HD line. With dual custom designed 15-inch woofers, the RS215 HD boasts 1200 watts peak/600 watts RMS power handling at four ohms. Employment of a 1.5-inch titanium compression driver also provides enhanced performance on the top end, making for a superior PA enclosure with professional sound.

We've also revamped the original Resound cabinet design to be more durable and lightweight, thanks to solid, all-wood construction. As a result, the RS215 HD is a remarkably portable enclosure, despite its size and power handling capabilities. This enclosure's design also acts as an impressive aesthetic complement to any professional sound system and its portability makes it a great addition to the equipment roster of any gigging band.

Perfect for on-the-go musicians, houses of worship and performance venues of varying sizes, the RS215 HD offers great power and professional sound in a strong, versatile enclosure.

Two-way passive PA speaker cabinet
1200 watt peak/600 watt RMS power handling @ 4 ohms
Dual custom designed 15-inch low frequency driver
1-inch throat horn
1.5-inch titanium compression driver
Dual-port tuned enclosure
Dual 1/4-inch and Speakon® connections 

RS15 HD

A custom designed woofer with increased power handling is just one of the features that sets the Resound HD PA speakers apart. The RS15 HD employs a 15-inch low frequency driver, offering 600 watts peak/300 watts RMS power handling at eight ohms. For a comparably articulate response on the top end, we used a titanium compression driver to handle the high frequencies. This combination of components produces a powerful, full-range sound that will ensure impressive audio in any performance venue.

The original Resound cabinet design has also been reworked with durable, all-wood construction to assist in sound dispersion and ensure that these enclosures withstand the test of time and heavy gigging. The aesthetics of the cabinet also make it an appropriate complement to any professional sound system, rounding out the complete versatility of these PA speakers.

Perfect for gigging musicians, houses of worship and performance venues of varying sizes, the RS15 HD passive PA enclosure offers professional sound in a versatile cabinet that is ideal for both portable and installation applications.

Two-way passive PA speaker cabinet
600 watt peak/300 watt RMS power handling @ 8 ohms
Custom designed 15-inch low frequency driver
1-inch throat horn
1.5-inch titanium compression driver
Dual-port tuned enclosure
Dual 1/4-inch and Speakon® connections 

The RS15 is also available in 12” and 10” speakers.

RS15M HD 15" Monitor

If you need a wedge monitor with more power and clear, precise audio, the RS15M HD is an ideal monitor for almost any live application. A custom designed 15-inch woofer handles the low frequencies while a titanium compression driver offers precise, lucid performance on the top end. The RS15M HD provides 600 watts peak/300 watts RMS power handling at eight ohms, so you have ample power for any performance.

The RS15M HD enclosure employs the same redesigned solid, all-wood construction as the Resound HD PA enclosures, resulting in a durable, portable cabinet. With professional style and performance, it works perfectly in any sound setup on any stage. And since it's tough and lightweight, it's also ideal for gigging musicians. This level of versatility ensures you get the power you want with the precision you need.

Two-way passive wedge monitor enclosure
600 watt peak/300 watt RMS power handling @ 8 ohms
Custom designed 15-inch low frequency driver
1-inch throat horn
1.5-inch titanium compression driver
Dual-port tuned enclosure
Dual 1/4-inch and Speakon® connections 

The RS15M HD Comes in hte following sizes: 10", 12" and 15"

Auro D412 Fuses Power and Portability with the Samson Sound.

Designed to encompass the key elements of power, portability and exceptional sound, Auro D412 is a lightweight, 2-way active speaker enclosure that combines superior components and meticulous engineering.

Delivering 400 watts of power, Auro D412 features a 12-inch extended low frequency driver and accompanying 1.34-inch compression driver. Immersive, articulate bass and sweet, lucid highs create well-balanced and expressive audio suitable for any situation when pro-quality sound is a must. Plus, our exclusive Optimax processing ensures the Auro D412 will operate at high volume levels without sacrificing low end. Its convenient 1/4-inch line input and XLR mic input, along with volume control and two-band equalizer, combine professional capabilities with total ease of use. The speaker also features a 1-3/8-inch pole mount receptacle and dual-angle floor monitor positioning options for flexible setup.

One feature you’ll love about the Auro D412 is its conveniently lightweight, yet resilient design. The unit provides two oversized ergonomic carry handles, making transportation a breeze, while the solid polypropylene construction ensures roadworthy durability. Auro D412 is ideal for sound professionals and performers seeking to bridge the gap between portable and fixed installation applications.

Auro D412 provides versatile speaker solutions that easily integrate into PA setups for a variety of applications, including musical and other general live sound reinforcement.

 Compact, lightweight 2-way active speaker system
 D412: 12-inch extended range low frequency driver
 1.34-inch (34mm) compression driver with 1-inch exit
 400 watts of output power
 XLR mic input
 1/4-inch line input
 Volume control
 2-band equalizer (Bass and Treble Controls)
 Line output allows daisy chaining of additional speakers
 Built-in Optimax compressor/limiter with two-stage speaker protection
 1-3/8-inch pole mount receptacle
 Two oversized ergonomic carry handles
 Dual-angle floor monitor positioning options
 Solid polypropylene construction 

Available in: 12” and 15”

dB1800a - Active Subwoofer

The dB1800a is a self-powered subwoofer featuring a heavy-duty 18" low frequency driver with butyl surround, complemented by a 1000 Watt power amplifier. The dB1800a provides an active stereo crossover with high-passed output for running your satellite speakers. Constructed of solid 3/4 inch plywood, with steel corners, tough carpet covering and large casters. The sub-woofer features large metal grab handles and a 35mm pole mount receptacle. In fixed installation systems, the dB1800a provides super tight low frequency output in a relatively small, unobtrusive enclosure. Perfect for any sound reinforcement system where low-end is desired.

Heavy-duty, 18-inch Low Frequency Transducer
Built-in Amplifier Delivers 1000 watts of Program Power
Variable Stereo Crossover with Balanced High Pass Outputs for Satellite Speakers
Heavy-Duty, Rear Mounted Casters
Extra Large Grab handles and 35mm Pole mount receptacle
3/4" Internally braced, plywood construction

The dB is available in 2 sizes:18" and 15"

dB500a - Active Loudspeaker

Inside our rigid custom designed cabinet is a 15" driver designed exclusively for this project. It's matched with a new 1.75" Titanium high frequency driver, aimed through a 1" diameter horn. The dB500a features 500 watts of clean power (400 watts low frequency/100 watts high frequency) and has a crossover designed for high SPL. Our exclusive Optimax(TM) signal processing circuitry provides total speaker protection but won't cut the low end at high volumes, as similar speakers with sliding filters do.

The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR connectors and level controls. Controls for the selectable low pass filter and Optimax processing are also included.

The dB500a speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
 

dB500 - Passive Loudspeaker

The passive dB500 has many of the same features as the dB500a, including the same rugged enclosure, and advanced drivers. A natural sounding fixed crossover is built-in, and the back panel features 1/4" and Speakon connectors.

The dB500 speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.

 

dB300i - Passive Loudspeaker (70/100 Volt)

The dB300i from Samson is designed as a solution for the installation market. It can be used either as an 8 ohm passive speaker or as a 70/100 volt sound distribution speaker. The versatility of the dB300i is highlighted by its ability to be installed using the integrated M6 flypoints, the integrated pole mount or by using the optional wall mount bracket.

The dB300i features a custom designed 12-inch low frequency driver for impressive, full-bodied bass. For smooth, clear highs we incorporated a 1-inch titanium compression driver mounted on the 60° x 90° constant directivity horn. The result is dynamic, full-range sound in just about any application.

The 8 ohm loudspeaker handles 100 watts of power. In addition, the dB300i includes a high quality, matching transformer with six level taps from 6.5 to 100 watts, allowing the sound designer to select the desired output level for each dB300i at every zone. This kind of versatility makes it an ideal installation solution.

The dB300i employs a high-impact polypropylene enclosure that is resilient and rigid, making it perfect for both indoor and outdoor use. Plus, the stylish design and cool gray finish allow the dB300i to aesthetically complement just about any audio setup or room décor.

Two-way passive installation loudspeaker system with built-in transformer
70/100 volt 120 watt transformer with selectable taps at 100 watts, 50 watts, 25 watts, 12.5 watts, 6.25 watts
8 ohms Impedance
Durable high-impact polypropylene with sturdy handles, pole mount and integrated M6 fly points
Custom designed, heavy-duty, 12-inch low frequency driver with 1.5-inch voice coil
1-inch throat, high frequency compression driver with 1.5-inch titanium diaphragm
Constant-directivity 60° x 90° high frequency horn
Optional wall mount bracket available
Polymer-encrusted, weather resistant woofer cone
Aluminum panel and grill
ABS water resistant terminal cover
Stainless steel hardware
Indoor/outdoor use for outdoor theme parks, hot yoga & health clubs
Corrosion resistant plating on high frequency motor 
 

dB300a - 2-Way Active Loudspeaker

Ideal for houses of worship and other smaller public address applications, the Samson dB300a two-way, portable active loudspeaker system delivers bi-amped, high-efficiency, 300 Watts RMS of power. Its custom designed 12-inch driver with 3-inch voice coil along with its 1.75 inch titanium compression driver with a 1-inch exit deliver clear highs and strong lows. The dB300a features a balanced microphone and line level inputs, XLR output and two band EQ.
The dB300a's rugged speaker cabinet is molded from high-impact polypropylene, and like its larger cousin, the dB500a, features an array of mounting options. Designed with versatility in mind, it can be easily stacked or permanently installed. A 1-3/8-inch pole receptacle is built in, with sturdy handles and integrated M6 fly points. The design of the dB300a also makes it usable as 30 or 45 degree floor monitors as well.

Two-way bi-amped, high-efficiency active loudspeaker system
300 Watts RMS total power
Custom designed, heavy-duty, 12-inch low frequency driver with 3-inch voice coil
1.75-inch titanium compression driver with 1-inch exit
Durable High-impact polypropylene with sturdy handles, pole mount, and integrated M6 fly points
45 and 30 degree monitor angles
Balanced microphone and line level inputs with Two Band EQ 

dB300 - 2-Way Loudspeaker

Ideal for houses of worship and other smaller public address applications, the Samson dB300 two-way, portable passive loudspeaker system has a power handling capacity of 300 Watts RMS. Its custom designed 12-inch driver with 3-inch voice coil along with its 1.75 inch titanium compression driver with a 1-inch exit deliver clear highs and strong lows. The dB300 features parallel Speakon™ and 1/4-inch input connectors.
The dB300's rugged speaker cabinet is molded from high-impact polypropylene, and like its larger cousin, the dB500, features an array of mounting options. Designed with versatility in mind, they are easily stacked or permanently installed. A 1-3/8-inch pole receptacle is built in, with sturdy handles and integrated M6 fly points. The design of the dB300 also makes it usable as 30 or 45 degree floor monitors as well.

Two-way portable passive loudspeaker system
300 watt RMS power handling
Durable High-impact polypropylene with sturdy handles, pole mount and integrated M6 fly points
Custom designed heavy-duty, 12-inch low frequency driver with 3-inch voice coil
1.75-inch titanium compression driver with 1-inch exit
30 and 45 degree monitor angles
Parallel Speakon® and 1/4-inch connectors